How to Create a Custom Waterway in Planet Coaster 2

It flows in Planet Coaster 2 It can make a water park more thrilling and give it an almost roller coaster-like feel. You can add high-speed sections and create twists and turns so your guests can dive into the water for an even more exciting experience. These rides can also help increase your park's rating significantly, depending on the pool's reputation.

The Flume tab has a variety of presets that can be placed right away without editing. But that takes away the fun of creating your own custom Flume. You'll find a variety of customization options in the customization generator, which you can test out to create fun vehicles.

How to use Flume Builder

To start building your own Custom Flume: Open the Flumes tab and select “Create Custom”. After doing that, Three model options We will present it to you. Choose your body plume If you want to create Flume instead of Slides. Then you will see a cursor. carrying platform you can place Near the edge of the pool.

If you are creating a channel in the middle of a swimming pool, you must Build a path to the platform So that we can put an entrance on top of it.. Otherwise, you will continue to see the message “This point is obscured.”

Getting started with Flume

Build two or three platforms side by side, Connect Flume Start to one of our platforms. You can choose either depending on how you prefer to ride. But when you're done, make sure the Flume isn't too extreme. There is a good balance of excitement, fear and nausea..

• Open Flume Startup
• Open Flume Start 1
• Closed Channel Start 1
• Sealed Flume Start 2
• Flume vertical start

that Closed and Open Flume Similarly, you start working and the ride begins in the direction they are facing. however Flume Vertical Start drops the guest. With a vertical channel body.

Creating a Flume Body

After creating a starting point, you can start creating: Flume body. Here are some options that can make your ride more interesting and attractive. you can choose Open or closed plain water body. The transparent water channel body allows guests to view the pool below.

As a beginner, I recommend avoiding high-speed options. Speed ​​may affect fear and nausea values ​​and may be more difficult to manage.

• open plume

• closed water channel

• Right side of Highside Channel

• Left side of Highside Channel

• transparent half pipe

• transparent pipe

• high speed half pipe

• high speed sealed waterway

• Right side of high-speed high-side channel

• Left side of high-speed high-side channel

connect one side to the other Until you complete your Flume creation. You can get creative here. Change your channel body We make your riding exciting.

But be careful While adjusting to a sharper angle Because customers might feel bad. using the extension icon length of body part.

You can also try special pre-made body presets. But make sure the platform is high enough.

After creating the body, you can: Finish by installing the Flume End. custom plume. There are many different types of ends you can try out here. 'Location' option Simple and You can finish wherever you want.

you need Some distance between the water and the Flume body to place the runout lane.Because it's a little longer. that The plughole moves guests in a circular spiral. before falling into the water add excitement.

• Plume End

• shallow runout lane

• deep runout lane

• plug hole right

• plug hole left

• Blocked plug hole on the right

• Plug hole surrounded on the left

Once you're done creating the Flume, don't forget to place the entrance. Even if the Flume is high up, creating an entrance will automatically create stairs leading to the Flume platform.

How to Test Flume

Now that you've completed Flume, it's time to test whether it's safe for guests to board. To do so, click on Flume and then click the world icon in the menu to start testing.

After all, you don’t want your guests to get scared or sick at Flume. Your focus is: Get maximum value of excitement.

The test also shows the different G-Forces that guests will experience during the ride. to reduce nauseacertainly Reduces lateral G-Force. As much as you can.

Guests can tolerate forward and vertical G-forces much better, so there is no need to reduce them as much.

Change the tab in the menu to go to the Testing section. Here you can see the pile changing levels of fear, nausea, and excitement as it moves through the Flume. If your fear and nausea spike too much, you know it's time to make some fine-tuning. At the end of the test, you'll see Flume's total rating at the top of the menu.

How to Fine-Tune Flume

you often Beware of sharper turns or steeper slides Located in some areas of the Flume Body. so, Flume Fine Tuning It's important if you want Reduces nausea and fear. This also adds a few tweaks to the structure: The guest experience becomes more interesting..

Click on the “Flume Edit” settings. Select Flume and start tuning. then Select the body part you want to editYou can make some changes to Flume by clicking on the arrow icon that appears. You can also change the Flume body as follows: Click on the piece and select different options from the tabs..

If you want to make a big change, you'll need to delete the piece and adjust the rest of the channel body with the new piece you placed.

After you have successfully tested your coaster and are satisfied with its fear, nausea, and excitement ratings, you can open it for guests visiting the park.

After completing Flume, make sure you have a water filtration system nearby so you can keep it clean and increase your Pool Prestige.

How to Create Custom Body Slides

Different types of Flume include: body slide, Although making a slide requires almost the same steps as making a body flume, making a slide is actually less complicated.

Below you can find some body slide models. “Create Custom” menu. There are two types: “Body Plume” and “Body Plume Wide”. Apart from the differences, both are similar. the latter is wider.

only two body types For Body Slides, you can choose one of the following: Transparent Slide or Open Flume Options. To make the body, all you have to do is place these parts one after the other to create a connected slide.

you can Use the icons on the side to adjust the angle and length.Similar to what we did with Flumes. then, Use Flume Ends Finish the body slide.

You cannot change direction. The slide moves forward only in the direction the slide body is facing.